- Serial number of the device

- Your phone details (brand, model, software version, etc)

- Screenshots or video of the error on the device

If you need to transfer your software, please contact tech support and provide the following:

- Old and New serial number

- Reason of software transfer

Please contact the dealer you purchased the device from to purchase software/updates directly

Android: Long hold the app icon, go to app info > storage > Clear cache and try the download again

iOS: Go to Me > Settings > Clear Cache and try the download again

Please contact tech support and provide a screenshot of the message received

Check if you are able to see "Log in Later" at the bottom right corner of the login screen. If not, please make sure to download MaxiAP200 to your AP200
Please contact tech support and provide your serial number to change the sales contract to all languages
Logs are collected via MaxiTools when the errors which are most likely related to system program issues occurred. Generally these errors occurred before we get access to internal diagnostic function menu or before we started to diagnose the vehicle. For example, when we tap Diagnostic—Benz, but error message “Authorization Check Failed” came up.

Generally this issue occurs after a factory reset attempt on a device that is out of subscription.

Go to ES File Explorer > SD Card > Scan > apk_back

Reinstall MaxiDas.apk

If the apk_back folder is not found on the SD card, please upload the data log via MaxiTools and send the MaxiUI version to tech support

If the device has a valid subscription, flash the device with program which will delete all data; If the device is out of subscription, flash the device with program which will not delete all data first; If the device is still stuck, the risk of using flash program will delete all data and flash the device with the program which will delete all data. Contact tech support for flash program
Please check if your device is in black list. If not, please upload logs via MaxiTools for further details

- Check to see if there is a network issue.

- Check if Autel's server Ips are blocked by your internet provider

- Try to connect the device to another wifi connection or your phone's hot spot

Please go to System Settings-Storage, check if internal space is enough;

Please go to System Settings--About tablet, check if MaxiUI version is too low;

If MaxiUI version is too low, you can use OSupdate apk. file (contact support for this file) to update the system version of the device to higher version first;

If internal space is not enough, please uninstall all software first, then download BMW, Benz, Audi one by one first before you download any other software.

If the space is still not enough, you can purchase a designated TF card and download BMW software into this TF Card

※ Only Sandisk TF card of 16G storage, class 10, 80MB/S is compatible with MaxiSys tools;

※ Only BMW can be downloaded into this TF Card;

If MaxiUI version is normal and internal space is enough, please upload data logs via MaxiTools for checking (refer to E. Upload data logs via MaxiTools).

A) "Error Message “Software is not authorized!”


Issue: Whichever software is tapped, you will see this pop-up window with the error message.

Solution:

Go to ES File Explorer--Scan folder, check if there is file “authorization.txt”;

Go to ES File Explorer--Scan—Vehicle, get access to each vehicle folder, check if the file “authorization.txt” is available;

If the “authorization.txt” file is missing in Scan folder, but exists in all other vehicle folders, please try

connect the tablet to computer via USB cable;

turn on USB storage ;

disconnect USB cable;

tap Diagnostics, select any software to check again.

If the above method is not working, you need to renew subscription and download all software again.


B) “Authorization Check Failed! Error Code: 1”


Issue 1:The error message above camp up when you tap specific software, for example, Mini, on the Diagnostic menu;


Solution:

Go to ES File Explorer—Scan—Vehicle, access to the corresponding vehicle folder, for example, Mini, check if the file”authorization.txt” is available there?

If not, please copy an “authorization.txt” file from vehicle folders, BMW, Rolls-Royce and AstonMartin (they must be from the same software pack when you download them) to Mini folder;

*Note:

BMW, Mini, Rolls-Royce and Aston Martin software are from the same software pack when we downloaded them in Update list;

“authorization.txt” file from other vehicle folders rather than BMW, Rolls-Royce and Aston Martin will not be working;

Check if Mini software is back to normal?

If still not working, you need to renew subscription and download the software again.


Issue 2:The error message above camp up when you tap whichever software on the Diagnostic menu


Solution:

Go to ES File Explorer—Scan—Vehicle, access to the corresponding vehicle folders, check if the file “authorizatuion.txt” is available in each folder?

If not, the only solution is to renew subscription and download all software again.


C) “Authorization Check Failed! Error Code: 2”


Issue 1: "Authorization Check Failed! Error Code: 2” indicates Serial Number and Register Password are not matched.


If the device is still in valid subscription,

Go to MaxiSys-Data manager-Apps Uninstall to uninstall all apps;

Run Update and download them back again.

If the device is out of subscription,

Please go to Settings—About, send the screenshot this page to our tech support to show them Serial Number and Register password of your device;

Collect Logs via MaxiTools and upload.


Issue 2: If you saw Error code 2: Serial or password is incorrect, and when you went to About section but found your serial number becameV09G00000131and register password became056947, please follow the below steps:


Turn this tool OFF and wait for 2 minutes, then turn it ON again;

Repeat the above steps for 5 times (at least) and check the serial number on About page again;

If it still shows S/N V09G00000131 and password 056947, contact the selling dealer for repairs.


D) “Authorization Check Failed! Error Code: 3”

Upload data log via MaxiTools;

Send S/N of your device to tech support for help


E) “Authorization Check Failed! Error Code: 4”

Upload data log via MaxiTools;

Send S/N of your device to tech support for help


F) “Authorization Check Failed! Error Code: 5”

Upload data log via MaxiTools;

Send S/N of your device to tech support for help


G) “Authorization Check Failed! Error Code: 8”

Upload data log via MaxiTools;

Send S/N of your device to tech support for help


H) “Authorization Check Failed! Error Code: 9”

Upload data log via MaxiTools;

Send S/N of your device to tech support for help


i) “Authorization Check Failed! Error Code: 10”

Upload data log via MaxiTools;

Send S/N of your device to tech support for help

Send us a screenshot of the error message you received What were you doing on the device prior to the error message popping up Upload the corresponding data logs via Maxi Tools in this way: • Reproduce this issue on your device; • After the same error occurred, go back to Home page; • Run MaxiTools, click on Start to collect logs; • After logs are collected, click on Upload; • Make sure you saw “Upload completed”.

Connect the device to wifi, click on Authorization button to finish authorization;

Or Uninstall software or erase SD card, then download software again to have the issues resolved.

- You should click the icon (shown in red box at the bottom) to start the log collecting process

- You will see the icon light up after clicked

- If the problem occurred during the diagnostic process, you should click the icon again to end the log collecting process, and then upload

- Please describe the issue in detail when you upload the data logs

After a log is collected, a log file will be automatically created and stored in your device;

You can go to ES File Explorer > Scan > Data logging to find out the corresponding vehicle folder;

You will see log files (generally zip file named by date) that you can emal directly to tech support

Software Issues when using other product models with Data Logging Function:

Generally data logs should be collected if you encounter software issues during the diagnostic process below:

- When you are accessing a specific system/all system

- Reading DTCs, clearing DTCs

- Reading or decoding VIN, reading live data

- Performing active tests, special functions or programming/coding, etc

Describe the problems/errors you are encountering in detail

Upload the corresponding data logs (Data log upload instruction: https://youtu.be/kkdSFht6rh4)

Make sure the data logs collected are valid and complete (a valid and complete data log starts from when you entered the diagnosis and ends when the problem you reported occurred

Make sure the data logs collected were uploaded successfully (Tech support can check in a corresponding system)

Provide the serial number of the device to tech support after the data logs are uploaded.

Check if all pre-conditions are fully satisfied

Record the diagnostic process in video and send to tech support;

Advise the make, model, year and VIN of the vehicle;

Send the screenshot of About page of your device;

Advise the specific function you were doing;

Advise in details the problems you encountered and what you have done on the vehicle.

Check if the vehicle being tested is OBDII compliant (EOBD or JOBD is not supported)

Vehicles adopted the OBDII system at different times and in different regions around the world:

- Europe: Adopted OBDII system since 2006

- U.S.A: Adopted OBDII system since 1996

- Asia: Adopted OBDII system since 2009

Check if any other OBDII compliant vehicles (US vehicles, Ford, GM, Chrysler are suggested) are communicating with the scanner or not; If other vehicles are communicating fine, it is most likely that the vehicle you are testing is NOT OBDII compliant

If it is confirmed that the vehicle is OBDII complaint but you are still receiving a linking error, please provide the following details:

- region/country

- screenshot of About information of your device

- VIN of your vehicle to our tech support

Check if the OBDII cable is working. change to another cable to confirm

Check if the OBDII function is communicating properly

Check if there are any issues with the vehicle itself

Check if any other vehicle has the same issue; If all vehicles are not communicating, please try another OBDII cable.

If this is the only vehicle not communicating properly, please check for problems with the vehicle itself

Check if there are any problems, especially connection issues, in this module

Check if there are any related issues/error codes in any other modules; If yes, fx those related errors first

If you are still receiving an error, please record a video of your diagnostic process and provide the details

You have successfully subscribed!
This email has been registered
用户本土时间:

用户UTC+8后时间:

促销UTC+8结束时间:

现在UTC时间小时:

本次活动结束倒计时:

下次活动结束时间: