Introduction to Autel MaxiBAS BT608
The Autel MaxiBAS BT608 is a touchscreen battery load tester that applies adaptive conductivity, an advanced battery analysis method that more accurately checks the cold start capability and spare capacity of a battery, which is essential for determining the true health of a battery. The BT608 can quickly display the health status of existing batteries, register new batteries, and perform advanced battery and electrical system diagnostics. The VIN scan function of the BT608 quickly identifies vehicle and battery specifications. Read/clear codes on all available vehicle systems. Print or share custom reports over Wi-Fi, or print test reports from the built-in thermal printer.
10 Main Points of Autel MaxiBAS BT608
★Supports in-car and out-of-car testing of passenger car batteries
★Test 6 volt and 12 volt batteries: 100 - 3000 CCA
★Test 12 volt and 24 volt start-up/charging systems
★Tests for fluid-rich, AGM, AGM spiral, EFB, and GEL batteries
★Compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA
★One-touch battery registration
★Quickly display battery specifications with battery barcode scanning, automatic and manual VIN entry
★Battery Positioning and TestIng Illustrated Instruction Guide
★Print test reports via the built-in thermal printer
★Read and erase the code for all available systems
State-of-the-art Automotive Battery Testing
The Autel BT608 battery load tester is designed to test 6V/12V enriched, AGM, AGM Spiral, EFB and GEL batteries with CCA (100 to 3000 CCA), CA, SAE, EN, IEC, DIN, JIS and MCA standards. The BT608 can test the health of the battery, providing an illustrated guide to battery positioning and testing.
State of charge: The amount of energy stored in the battery relative to its capacity.
Voltage: The potential difference between the positive and negative electrodes of the battery.
Measurement capacity: The energy storage capacity of the battery measured in cold start current.
One-touch battery replacement/registration with illustrated guide
The BT608 can register/replace the battery with just a touch of the screen. It provides an illustrated guide to show the entire battery replacement process.
After the new battery is registered, the vehicle system can be initialized to reset the components.
Reinitialize the vehicle system so that it is working properly again
After replacing/registering the battery, some vehicle systems may not function properly after a complete power outage. The Autel MaciBAS BT608 Battery Test Scanner features an "appliance reset" function that enables mechanics and DIYcs to reinitialize or restore learning values and emissions inspection and maintenance programs that are critical to safety and convenience-related vehicle systems such as sunroof resets, lane departure warning systems, and pre-collision systems.
Cranking Charging System Test
BT608 Battery Tester can test battery and also 12- and 24-volt Cranking/Charging Systems( starter and alternator).
In-Vehicle Test
Cranking Voltage
Cranking Amps
Engine cranking speed before start
Out-Vehicle Test
BT608 can test the health of a battery when it’s not installed in the vehicle, just input the correct battery specifications based on the information printed on the battery’s label, verify battery type, battery standard and battery capacity.
Even when a battery is in a poor state of charge, it can accurately test its potential for stored energy without necessitating a recharge prior to test. This can expedite diagnosis and more quickly achieve the sales of a replacement unit.
BT608 Wireless Full System Diagnostics
The Autel BT608 is not only a professional battery tester, but also an ideal wireless OBD2 FULL SYSTEMS scanning tool with the same vehicle/year coverage as the autel MX808/MK808/MK808BT. It can read/clear full system failure codes/view DTC descriptions, real-time data, and freeze-frame data for over 80 U.S., EU, and Asian vehicles up to 2019/2020 and some 2021. With lifetime free updates and support for newer cars, the BT608 is an ideal full-system scanning tool.
Comparison between BT608 & BT508 & BT506
Autel BT608 Specifications
| Operating System: |
Android 9.0 |
| Screen Display: |
5.5'' LCD touch screen with 720*1280 resolution |
| Storage: |
32 GB |
| Connectivity: |
Wi-Fi (802.11 a/b/g/n/ac),USB 2.0, Type C, BT5.0+EDR |
| Camera: |
8 Megapixel |
| Input Voltage: |
5 V DC |
| Working Current: |
450 mA at 7.7 V DC |
| Internal Battery: |
7.7 V, 3000 mAh |
| CCA Range: |
100 to 3000 A |
| Voltage Range: |
1.5 to 36 V |
| Working Temperature: |
0° to 50° C (32° to 122° F ) |
| Storage Temperature: |
-10° to 60° C (14° to 140° F ) |
| Dimension (L x W x H): |
-204 mm x 90 mm x 32 mm (8.03” x 3.54” x 1.25”) |
| Weight: |
510 g (1.12 lb.) |
Autel BT608 Package Content
- 1x BT608 Main Unit
- 1x MaxiCVI MV200 Series
- 1x Battery Clamp Cable
- 2x Paper Roll
- 2x Battery Side Post Terminal TYPE T
- 2x Battery Side Post Terminal TYPE S
- 1x Power Adapter
- 1x USB Cable
